The appearance of plastic line channel is similar to that of metal channel, and its supporting accessories are more.Among them, PE conduit is a plastic semi-rigid conduit, with high strength, corrosion resistance and other characteristics, open and dark lines are used in a variety of lines.On the other hand, because PCV conduit is a rigid conduit containing polyvinyl chloride resin, the small diameter wire channel can be bent at room temperature, making it more and more widely used in many complex wiring requirements, and easy to use in the outdoors.

Plastic Grommet Installation Steps

First.Is the positioning of the bullet line, the bullet line in the positioning, it should use the protection tube for protection, and the height of the protection tube, and the ground must be separated by a distance of more than one meter eight.Second.The fixing of the line groove, the fixing of the line groove is more troublesome, need to be pre-buried wood tiles, and smoothed with cement mortar, wait until the cement mortar solidification is after the line groove floor with the standard wood screws will be fixed in the pre-buried wood tiles above.Third.The connection of the wire channel, the connection method of the wire channel has a variety of methods, according to the actual environment and the relevant use to determine the entire plastic wire channel installation steps among the connection method.Fourth.Then put the wire in the slot, and then the wire connection, to know the wire connection, must be correctly distinguished from the relevant protection ground.Neutral wire and phase wire, etc.Fifth.The last is to carry out the relevant line inspection, test the insulation and other aspects of the performance.

Price of plastic cable channels

Plastic wire channel price in 5 to 8 yuan a meter, the specific and the type of plastic related, plastic including polyamide.Polyformaldehyde.Polycarbonate.Modified polyphenylene ether.Thermoplastic polyester.Ultra high molecular weight polyethylene.Methyl pentene polymers.Vinyl alcohol copolymer, etc.

Plastic wire channel specifications

There are many varieties of plastic trough specifications, in terms of model number: PVC-20 series.PVC-25 series.PVC-25F series.PVC-30 series.PVC-40 series.PVC-40Q series, etc.In terms of specifications, there are: 20×12.25×12.5.25×25.30×15.40×20, etc.The accessories matching with PVC trough are: Yang angle .Yin corner.Straight corner.Flat tee.Left tee.Right tee.Connecting head.Termination.Junction box (concealed box.Light box), etc.